Bundled with our HO-1000A and B wooden ore car kits, these decals are suitable for Duluth and Iron Range wooden ore cars built by Pullman in 1892. They work with most commercial decal setting solutions. We are only offering HO scale decals at this time.
Bundled with our HO-1000C and D wooden ore car kits, these decals are suitable for Duluth, Missabe and Northern wooden ore cars built by Pullman in 1892. They work with most commercial decal setting solutions. We are only offering HO scale decals at this time.
Bundled with our HO-3000A and B flat car kits, these decals are suitable for Saint Paul, Minneapolis and Manitoba 28 and 30 foot flat cars built in 1885 and 1886. They work with most commercial decal setting solutions. We are only offering HO scale decals at this time.
Bundled with our HO-3000A and B flat car kits, these decals are suitable for Great Northern (formerly Saint Paul, Minneapolis and Manitoba) 28 and 30 foot flat cars built in 1885 and 1886. They work with most commercial decal setting solutions. We are only offering HO scale decals at this time.
These truck frames are designed to go under my United Verde and Pacific #5 tender. Similar style trucks were seen under narrow gauge engines in Guatemala and South America (such as the Georgetown Loop 2-8-0s). Designed to use NWSL 24″ diameter needlepoint wheelsets, but NWSL 26″ wheelsets could be substituted. Hit includes 2x 3d…
Large Centercab type 1
S Scale MOW Spreader. Currently used on Sn42 trucks but no issue with Sn3 trucks. Not tested with Standard gauge trucks. HO KD#5 couplers and coupler boxes used. Add extra details as required. Wings are not moveable.
S Scale Air Dump. Currently used on Sn42 trucks but no issue with Sn3 trucks. Not tested with Standard gauge trucks. HO KD#5 couplers and coupler boxes used.
S Scale Air Dump (Smooth Side). Currently used on Sn42 trucks but no issue with Sn3 trucks. Not tested with Standard gauge trucks. HO KD#5 couplers and coupler boxes used.
S Scale Narrow Gauge Stockcar. Currently used on Sn42 trucks but no issue with Sn3 trucks. HO KD#5 couplers and coupler boxes used.
On30 Critter 1
On30 Critter 2 Cabbed diesel
On30 Milwaukee center cab gas loco Fits on a single truck from a dual-motor Bachmann 44T locomotive.
On30 Critter 3 open cab diesel
On30 Critter 4 open cab diesel
On30 wood-bodied gas-electric 31 ft long.
Car Sides for the CN and VIA Cafe – Lounge series 750 to 765.
S Scale PROX Tankcar. Currently used on Sn42 trucks but no issue with Sn3 trucks. Not tested with Standard gauge trucks. HO KD#118 couplers and coupler boxes used.
Narrow Gauge Pullman Underbody Air Brake parts
A steam dome with a decorative ribbed hemisphere was a signature look for many Locomotives produced by Rogers before the Turn of the Century.
This dome is intended for kitbashing, and can be glued simply on top of any model you might be assembling. It should fit approximately onto a 1/4″ radius boiler for your HO model. There is an additional center locator tab within the dome should you desire to have it placed precisely onto your model: simply align it onto a marked drill spot on the boiler where it is desired. The tab can also be removed using cutters if not wanted.
S Scale Gondola. Currently used on Sn42 trucks but no issue with Sn3 trucks. Not tested with Standard gauge trucks. HO KD#5 couplers and coupler boxes used.
S Scale Steel Plow. Currently used on Sn42 trucks but no issue with Sn3 trucks. Not tested with Standard gauge trucks. HO KD#5 couplers and coupler boxes used. Comes with with or without wing attachments.
a truck mounted generator
As Rebuilt in 1937
HOn3
